Contact
- Malaysia 0193045689
- Indonesia 0122260579
- farmour007@gmail.com
- B-09-15, Menara Prima, Jalan PJU1/39, Dataran Prima, 47301 Petaling Jaya, Selangor, Malaysia
Premium
Farmour Premium is a concentrated solution designed to protect plants from a wide range of diseases. It helps to control pathogens that cause plant illnesses, including viruses, bacteria, phytoplasmas, fungi and fungal-like organisms. It is easy to use, using cutting edge technology of Quantum Dot, and non-toxic and safe for users after diluted according to instruction. Detail application as follows.
Farmour Premium 農护甲 – 60ml or 108g
This is a concentrate and will need to be diluted when used.
Strongly advisable to use RO water (Reverse Osmosis water) to dilute Farmour Premium. This is to maintain the quality of the material at its optimum performance. If the bottle and RO water not contaminated, such diluted material can maintain its quality for 3-4 weeks.
Farmour at its concentrate level (i.e. before dilution) is sensitive to UV light, hence keep the material away from direct sunlight. When working on the material, advisable to close the cap quickly to minimise the material’s exposure to UV light.
Palm Oil
As for palm oil trees, we like to suggest a way to apply the material easily, and for most cases, we can control the basal stem rod (BSR) caused by Ganoderma油棕樹靈芝病 issue with Farmour 農护甲.
Dilution ratio : 1 ml Farmour Premium : 500 ml of RO water
(i) On the palm oil tree, near to the Ganoderma affected area, find 2 spots that are not rotten. Removed the outer layer of the palm oil trunk with a knife until you can see the inner core of the trunk.
(ii) Drill a hole on each spot of the inner core (not rotten), about 6-10 cm deep with 5 mm drill bit.
(iii) Using a RO water bottle of 500 ml (or a plant drip bag), 500 ml of RO water diluted with 1 ml of Farmour
is injected into the tree..
(iv) Repeat the above after 2-4 weeks, depending on the tree conditions or you can follow your harvesting
cycle if the plantation is big as long as the repeated treatment on each tree is within 1 month.
Best practice
If noticed that certain area of a plantation has a lower palm oil yield as compared with previous years or ther area, usually this indicates that trees are having problem like fungal, Ganoderma or other plant issues. Suggest to conduct 3 treatments for all trees in that area as a yield improvement step. Some palm oil plantations find that after 3 treatments, the yield can improve by 20%-30%. Thereafter, advisable to repeat treatment after 6 months depending on the condition of the tree.
Usually for palm oil trees more than 10 years old, Farmour can help the trees to be stronger and hence can produce more fruits and faster cycle.
dilution ratio
Based on the above dilution ratio, using a bottle of 500 ml RO water as a base, can drip 1 ml of Farmour. Mix it well, replace the bottle cap with a drip tube. The material is ready for 1 treatment on a palm oil tree. If you are using a drip bag of 500ml and using 1.5L of RO water bottle, then use 3 ml of Farmour to mix with 1.5L of RO water, mix well. Such 1.5L of mixed material can be used for a treatment on 3 palm oil trees (i.e. 500 ml of mixed material each tree).
Palm Oil
Using plant drip bag to deliver diluted Farmour Premium on palm oil tree. Second time treatment, shows trees are growing again, and Ganoderma has dry up
We engaged an external laboratory to test, namely CAIQ Biosecurity Sdn Bhd (CAIQ), in June 2023 and they found that affected trees (with Ganoderma) which underwent three times treatment of Farmour some have reduction in yeast and mould of up to 97.62%. Please refer to our product in Plantation & Test conducted
We offer Plant Drip Bag (500ml) for RM3.00 a bag, with a condition of minimum order of 10 plant drip bags and purchase of a bottle of Farmour Premium – 60 ml. Please contact us directly or look for us in Lazada.com. For our existing customers, if you need more plant drip bags, we sell a minimum of 30 bags at RM3.00 a bag.
Durian and other fruit trees
After removing the rotten part on the tree, spray the diluted Farmour Premium on the “clean” portion, about once every 4 days until the plant recover. Most situation can recover within 1-2 months.
(i) – Removed the rotten tissue on the tree by scrapping them off with a knife etc. until you see the “clean” tree body.
(ii) – On the above affected area, spray the diluted material of Farmour Premium. Use approx. 70-100 ml of diluted material on each tree.
(iii) – Repeat step 2 every 4-5 days. Suggest on sunny days.
(iv) – Suggest to spray the diluted material on surrounding trees 2-3x during the step 2 treatment to prevent the fungal issue spreading to surrounding trees. Spray around tree body 1 round
dilution ratio
Based on the above dilution ratio, using a bottle of 1,500 ml RO water as a base, can drip 6 ml of Farmour. Mix it well, then pour 70ml – 100 ml into a spray for each tree treatment.
This bottle of 1.5L of RO water with 6 ml of Farmour can be used to treat 15-20 durian trees (each time